How To Install Grizzly Box Blind Approach Shelf
Use our step-by-step guide with pictures. When installing your Approach Shelf into your Grizzly Box Blind. You can also use the PDF version of this how to install box blind shelf guide here, Grizzly Box Blind Approach Shelf Installation PDF.
Total Time Needed: 15 minutes
Required Tools:
- Drill
- 9/32 drill bit
- Window cleaner or soapy water
Materials:
- 1 – Approach Shelf
Installing Grizzly Box Blind Approach Shelf - Step by Step Guide
Inventory All Components
- 4 – Exterior Knob & Rubber Washer
- 2 – Interior Knob w/ Screw
- 2 – Track Receiver
- 2 – Threaded Rubber Bumper
- 2 – Track End Cap
- 4 – 1/4-20 x 5/8 Button Socket Screw
- 4 – 1/4-20 x 1/2 Button Socket Screw
- 1 – Extrusion Track – 32″
Assemble Track System
All tracks require 2 track receivers, 2 interior knobs, and 2 end caps.
Insert End Caps
To insert end caps, insert widest portion first and rotate up; Window cleaner or other soapy liquid may help with installation.
Apply Rubber Washers
Apply rubber washers to the exterior knobs.
Drill And Mount Track
Using the supplied template, drill the two center holes for mounting the track with a 9/32 drill bit. The track will be centered 3″ under any of the three horizontal windows. Mount the track with the center two 1/4-20 x 5/8″ button head screws and exterior knobs. Use the track as a guide to drill the outer holes.
Assemble Shelf
Assemble shelf by inserting the side lip of the shelf through the rectangular hole on the side support. Line up the screw hole and secure with the supplied 1/4 – 20 x 1/2″ button head screw. Repeat for all (4) locations.
Install Rubber Bumper & Remove Paper
Install rubber bumper on the back lower portion of the shelf. These bumpers are used to help level the shelf after installation. Remove paper from shelf liners.
Complete Box Blind Approach Shelf Installation
Once shelf is assembled, hang using the two interior knobs in the track.
